AQUAGUARD 100 is based on sodium HexaMetaPhosphate and is used to inhibit corrosion and hardness scale formation in domestic water and commercial potable water systems. It may be injected continuously without the formation of excessive scale in the pipe line.
A phosphate reserve is normally maintained within set limits in the domestic water. The correct treatment level depends on operating conditions such as the chemical characteristics of the water. The optimum treatment level for any plant will be specified by SWTC. The treatment may be injected using a dosage pump or a dosage pot as appropriate to the particular installation. Its viscosity permits handling by conventional dosage pumps without dilution but it may be diluted if desired. AQUAGUARD 100 is not corrosive to mild steel mixing tanks or dosage pumps in concentrated or dilute form.
Effective corrosion inhibitor, minimizes “red water”
Effective scale inhibitor.
Approval for use in domestic and potable water applications.
May be dosed direct from drum.
Simple on site control test.